Heavy Duty - High Power ELCIs 60A
120V/60A, 240V/60A and 380V/60A
Configured for both in-line and bulk head mount.
Engineered to trip within 25 milliseconds. Protects:
- Motors
- Manufacturing Equipment
- Pumping Systems
|
- Welders
- Pressure Washers
- Hoists
|
Has 2' of cable on both line and load side. To prevent
equipment startup after ELCI trips, manual reset required.
Will reset on power restoration following disruption of primary
power.
Heavy Duty - High Power ELCI Product Sheet
Wiring Instructions for HIgh Power GFCI/ELCIs
| Part Number | Features | Config | Listed |
|---|
24520 001-1
| - Volts/Amps: 120V/60A
- Cord Gauge: 4/3 AWG.
- Trip Level: 10 mA
- Single Phase
|  | |
24530 001-1
| - Volts/Amps: 240V/60A
- Cord Gauge: 4/4 AWG.
- Trip Level: 10 mA
- Three Phase
| | |
25560 001-1
| - Volts/Amps: 380V/60A
- Cord Gauge: 4/4 AWG.
- Trip Level: 30 mA
- Three Phase
| | |
| Response time for ground fault | 25mS - typical
|
| Frequency | 50/60 Hz
|
| Endurance | 3,000 operations minimum
|
| Overload current | six times rated current
|
| Operating temperature range | -20˚C to +40˚C
|
| Insulation voltage | 1500 VRMS - 1 Min.
|
| Power on indication | lighted indicator
|
| Drop out voltage | 60% rated voltage - typical
|
| Reset type | auto
|
| Connection type | flying leads
|
| Enclosure | NEMA 4 polymer |
