GFCI In-Line Cord Sets
with Molded Locking Connectors

120V/15A and 120V/20A

Excellent for industrial plant maintenance, equipment service and construction site applications.  Provides compliance with National Electric Code (NEC 2008) Article 590.6 for "Temporary Installations".   Applications include:

Rainproof rated, UL listed for outdoor use.  Standard Lengths: 2' and 6'.  Custom cable gauges, lengths and terminations available by special order.  To prevent unmonitored equipment startup, manual reset is required after GFCI trip and power outage.

GFCI In-Line Cord Sets with Molded Locking Connectors Product Sheet

 

 

Part Numbers & Features

 

 

Technical Data

 

 

Drawings & Measurements

 

 

Part Number	Features	Config	Listed
26020-097 (2')	Volts/Amps: 120V/15A Cord Gauge: 14/3 NEMA L5-15 P&R Molded locking connectors Trip Level: 4-6 mA
25080-136 (2') 25080-137 (6')	Volts /Amps: 120V/20A Cord Gauge: 12/3 NEMA L5-20 P&R Molded locking connectors Trip Level: 4-6 mA

 

 

 

Grounded neutral	4 Ohms typical
Trip response time for ground fault and grounded neutral trip	less than 25mS
Voltage surge withstand	3kv ringwave test and 4kv/2kA surge immunity test
Radio frequency noise susceptibility	operates within normal limits with 0.5 volts injected on power line 150kHz-230mHz
Frequency	50/60 Hz
Endurance	3,000 operations minimum
Overload current	six times rated current
Operating temperature range	-35˚C to 66˚C
Effect of 10 Amp turn DC Shock on ground fault trip	5% maximum trip level variation
Insulation voltage	1500 VRMS - 1a Min.
Power on indication	lighted indicator